Wall-hung double vanity
1200 × 410 × 500 mm · 2 bays · White, matt
Cut list produced 06/09/2026 for Yisehak Tilahun · www.medosha.net/designs/wall-hung-double-vanity-39873
27
Panels
4.391 m²
Board
5.75 m
Banding
0.8
Shop days
18 mm MDF, white melamine21 pieces · 2.858 m² · 2 sheets
| # | Part | Length | Width | Qty | Edge banding | Grain |
|---|---|---|---|---|---|---|
| 1 | Bottom | 1164 | 500 | 1 | Front | Any |
| 2 | Top | 1164 | 500 | 1 | Front | Any |
| 3 | Left gable | 410 | 500 | 2 | Front | Any |
| 4 | Divider 1 | 374 | 500 | 1 | Front | Any |
| 5 | Drawer 1 front and back — bay-1 | 511 | 139 | 8 | One end | Any |
| 6 | Drawer 1 sides — bay-1 | 476 | 139 | 8 | One end | Any |
4 mm HDF back panel, white6 pieces · 1.533 m² · 1 sheet
| # | Part | Length | Width | Qty | Edge banding | Grain |
|---|---|---|---|---|---|---|
| 7 | Drawer 1 base — bay-1 | 547 | 476 | 4 | — | Any |
| 8 | Back panel — bay-1 | 410 | 600 | 2 | — | Any |
Sheet layout
18 mm MDF, white melamine
2 sheets of 2440 × 1220 mm · 2.859 m² cut from 5.954 m² · 52% offcut
Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.
4 mm HDF back panel, white
1 sheet of 2440 × 1220 mm · 1.533 m² cut from 2.977 m² · 48% offcut
Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.
Hardware
ETB 10,868 to make plus 25% margin. 0% of it is priced from live supplier listings; the rest is estimated from catalogue rates. This is an estimate produced from a design, not a quotation.
Notes
- · All dimensions in millimetres. Length runs with the grain where the board has one.
- · Sheet counts come from the layout on the following pages, not from an offcut allowance.
Have it made
Send this cut list to a joinery on Medosha and ask what they would charge to build it.