Kitchen run, 3600 mm

5760 × 2180 × 600 mm · 11 bays · White, satin

Cut list produced 06/09/2026 for Yisehak Tilahun · www.medosha.net/designs/kitchen-run-3600-mm-12709

155

Panels

43.812 m²

Board

107.14 m

Banding

5.9

Shop days

38 mm post-formed worktop, granite pattern2 pieces · 3.715 m² · 0 sheets

#	Part	Length	Width	Qty	Edge banding	Grain
1	Worktop	5160	620	1	Front + both ends	Do not rotate
2	Splashback	5160	100	1	Front + both ends	Do not rotate

4 mm HDF back panel, white18 pieces · 9.55 m² · 5 sheets

#	Part	Length	Width	Qty	Edge banding	Grain
3	Back panel — bay-msw0ri0s-14	770	2160	1	—	Any
4	Back panel — bay-1	2080	600	1	—	Any
5	Back panel — bay-4	770	800	1	—	Any
6	Back panel — bay-13	720	800	3	—	Any
7	Back panel — bay-3	770	600	3	—	Any
8	Back panel — bay-19	720	600	1	—	Any
9	Drawer 1 base — bay-3	538	576	7	—	Any
10	Back panel — bay-7	770	400	1	—	Any

18 mm MDF, white melamine135 pieces · 30.547 m² · 12 sheets

#	Part	Length	Width	Qty	Edge banding	Grain
11	Bottom	2124	600	1	Front	Any
12	Top	2124	600	1	Front	Any
13	Left gable	2080	600	2	Front	Any
14	Door — bay-1	2076	560	1	All four edges	Any
15	Door — bay-msw0ri0s-14 (pair)	766	1059	2	All four edges	Any
16	Left gable	770	600	12	Front	Any
17	Bottom	764	600	1	Front	Any
18	Top	764	600	1	Front	Any
19	Door — bay-6	766	560	1	All four edges	Any
20	Door — bay-19	716	560	1	All four edges	Any
21	Bottom	564	600	4	Front	Any
22	Top	564	600	4	Front	Any
23	Shelf — bay-6	564	586	1	Front	Any
24	Door — bay-4 (pair)	766	379	2	All four edges	Any
25	Door — bay-7	766	360	1	All four edges	Any
26	Door — bay-13 (pair)	716	379	6	All four edges	Any
27	Bottom	764	350	3	Front	Any
28	Top	764	350	3	Front	Any
29	Shelf — bay-13	764	336	6	Front	Any
30	Left gable	720	350	8	Front	Any
31	Bottom	364	600	1	Front	Any
32	Top	364	600	1	Front	Any
33	Shelf — bay-7	364	586	1	Front	Any
34	Bottom	564	350	1	Front	Any
35	Top	564	350	1	Front	Any
36	Shelf — bay-19	564	336	2	Front	Any
37	Drawer front 1 — bay-5	242	560	3	All four edges	Any
38	Drawer 1 sides — bay-5	576	182	6	One end	Any
39	Drawer front 1 — bay-3	181	560	4	All four edges	Any
40	Drawer 1 front and back — bay-5	502	182	6	One end	Any
41	Drawer 1 sides — bay-3	576	136	8	One end	Any
42	Drawer 1 front and back — bay-3	502	136	8	One end	Any
43	Zekolo leg	100	50	32	—	Any

Sheet layout

4 mm HDF back panel, white

0 sheets of 2440 × 1220 mm · 0 m² cut from 0 m² · 0% offcut

2 pieces do not fit a sheet

· Worktop — 5160 × 620 mm does not fit a 2440 × 1220 mm sheet in either direction
· Splashback — 5160 × 100 mm does not fit a 2440 × 1220 mm sheet in either direction

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

4 mm HDF back panel, white

5 sheets of 2440 × 1220 mm · 9.55 m² cut from 14.884 m² · 36% offcut

Sheet 1 of 5 · 2 pieces · 66% used

Sheet 2 of 5 · 3 pieces · 59% used

Sheet 3 of 5 · 3 pieces · 50% used

Sheet 4 of 5 · 4 pieces · 82% used

Sheet 5 of 5 · 6 pieces · 62% used

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

18 mm MDF, white melamine

12 sheets of 2440 × 1220 mm · 30.549 m² cut from 35.722 m² · 14% offcut

Sheet 1 of 12 · 32 pieces · 92% used

Sheet 2 of 12 · 6 pieces · 95% used

Sheet 3 of 12 · 4 pieces · 97% used

Sheet 4 of 12 · 8 pieces · 93% used

Sheet 5 of 12 · 8 pieces · 93% used

Sheet 6 of 12 · 8 pieces · 91% used

Sheet 7 of 12 · 7 pieces · 90% used

Sheet 8 of 12 · 11 pieces · 82% used

Sheet 9 of 12 · 10 pieces · 79% used

Sheet 10 of 12 · 13 pieces · 88% used

Sheet 11 of 12 · 14 pieces · 89% used

Sheet 12 of 12 · 14 pieces · 37% used

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

Hardware

Soft-close concealed hinge, 110° — 14 door leaves31 each
Brushed steel bar handle, 160 mm — One per front21 each
Soft-close full-extension runner — 7 drawers, one pair each7 pair
Shelf support pin — 10 shelves, four pins each40 each
Adjustable cabinet leg — Front and back rows46 each
LED strip, 3000K5.76 m

Estimated priceETB 91,970

ETB 73,576 to make plus 25% margin. 0% of it is priced from live supplier listings; the rest is estimated from catalogue rates. This is an estimate produced from a design, not a quotation.

Notes

· All dimensions in millimetres. Length runs with the grain where the board has one.
· Sheet counts come from the layout on the following pages, not from an offcut allowance.
· Grain-matched parts are marked and must not be rotated when nesting.

Have it made

Send this cut list to a joinery on Medosha and ask what they would charge to build it.

Back to the design

Excel

Kitchen run, 3600 mm

5760 × 2180 × 600 mm · 11 bays · White, satin

Cut list produced 06/09/2026 for Yisehak Tilahun · www.medosha.net/designs/kitchen-run-3600-mm-12709

155

Panels

43.812 m²

Board

107.14 m

Banding

5.9

Shop days

38 mm post-formed worktop, granite pattern2 pieces · 3.715 m² · 0 sheets

#	Part	Length	Width	Qty	Edge banding	Grain
1	Worktop	5160	620	1	Front + both ends	Do not rotate
2	Splashback	5160	100	1	Front + both ends	Do not rotate

4 mm HDF back panel, white18 pieces · 9.55 m² · 5 sheets

#	Part	Length	Width	Qty	Edge banding	Grain
3	Back panel — bay-msw0ri0s-14	770	2160	1	—	Any
4	Back panel — bay-1	2080	600	1	—	Any
5	Back panel — bay-4	770	800	1	—	Any
6	Back panel — bay-13	720	800	3	—	Any
7	Back panel — bay-3	770	600	3	—	Any
8	Back panel — bay-19	720	600	1	—	Any
9	Drawer 1 base — bay-3	538	576	7	—	Any
10	Back panel — bay-7	770	400	1	—	Any

18 mm MDF, white melamine135 pieces · 30.547 m² · 12 sheets

#	Part	Length	Width	Qty	Edge banding	Grain
11	Bottom	2124	600	1	Front	Any
12	Top	2124	600	1	Front	Any
13	Left gable	2080	600	2	Front	Any
14	Door — bay-1	2076	560	1	All four edges	Any
15	Door — bay-msw0ri0s-14 (pair)	766	1059	2	All four edges	Any
16	Left gable	770	600	12	Front	Any
17	Bottom	764	600	1	Front	Any
18	Top	764	600	1	Front	Any
19	Door — bay-6	766	560	1	All four edges	Any
20	Door — bay-19	716	560	1	All four edges	Any
21	Bottom	564	600	4	Front	Any
22	Top	564	600	4	Front	Any
23	Shelf — bay-6	564	586	1	Front	Any
24	Door — bay-4 (pair)	766	379	2	All four edges	Any
25	Door — bay-7	766	360	1	All four edges	Any
26	Door — bay-13 (pair)	716	379	6	All four edges	Any
27	Bottom	764	350	3	Front	Any
28	Top	764	350	3	Front	Any
29	Shelf — bay-13	764	336	6	Front	Any
30	Left gable	720	350	8	Front	Any
31	Bottom	364	600	1	Front	Any
32	Top	364	600	1	Front	Any
33	Shelf — bay-7	364	586	1	Front	Any
34	Bottom	564	350	1	Front	Any
35	Top	564	350	1	Front	Any
36	Shelf — bay-19	564	336	2	Front	Any
37	Drawer front 1 — bay-5	242	560	3	All four edges	Any
38	Drawer 1 sides — bay-5	576	182	6	One end	Any
39	Drawer front 1 — bay-3	181	560	4	All four edges	Any
40	Drawer 1 front and back — bay-5	502	182	6	One end	Any
41	Drawer 1 sides — bay-3	576	136	8	One end	Any
42	Drawer 1 front and back — bay-3	502	136	8	One end	Any
43	Zekolo leg	100	50	32	—	Any

Sheet layout

4 mm HDF back panel, white

0 sheets of 2440 × 1220 mm · 0 m² cut from 0 m² · 0% offcut

2 pieces do not fit a sheet

· Worktop — 5160 × 620 mm does not fit a 2440 × 1220 mm sheet in either direction
· Splashback — 5160 × 100 mm does not fit a 2440 × 1220 mm sheet in either direction

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

4 mm HDF back panel, white

5 sheets of 2440 × 1220 mm · 9.55 m² cut from 14.884 m² · 36% offcut

Sheet 1 of 5 · 2 pieces · 66% used

Sheet 2 of 5 · 3 pieces · 59% used

Sheet 3 of 5 · 3 pieces · 50% used

Sheet 4 of 5 · 4 pieces · 82% used

Sheet 5 of 5 · 6 pieces · 62% used

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

18 mm MDF, white melamine

12 sheets of 2440 × 1220 mm · 30.549 m² cut from 35.722 m² · 14% offcut

Sheet 1 of 12 · 32 pieces · 92% used

Sheet 2 of 12 · 6 pieces · 95% used

Sheet 3 of 12 · 4 pieces · 97% used

Sheet 4 of 12 · 8 pieces · 93% used

Sheet 5 of 12 · 8 pieces · 93% used

Sheet 6 of 12 · 8 pieces · 91% used

Sheet 7 of 12 · 7 pieces · 90% used

Sheet 8 of 12 · 11 pieces · 82% used

Sheet 9 of 12 · 10 pieces · 79% used

Sheet 10 of 12 · 13 pieces · 88% used

Sheet 11 of 12 · 14 pieces · 89% used

Sheet 12 of 12 · 14 pieces · 37% used

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

Hardware

Soft-close concealed hinge, 110° — 14 door leaves31 each
Brushed steel bar handle, 160 mm — One per front21 each
Soft-close full-extension runner — 7 drawers, one pair each7 pair
Shelf support pin — 10 shelves, four pins each40 each
Adjustable cabinet leg — Front and back rows46 each
LED strip, 3000K5.76 m

Estimated priceETB 91,970

ETB 73,576 to make plus 25% margin. 0% of it is priced from live supplier listings; the rest is estimated from catalogue rates. This is an estimate produced from a design, not a quotation.

Notes

· All dimensions in millimetres. Length runs with the grain where the board has one.
· Sheet counts come from the layout on the following pages, not from an offcut allowance.
· Grain-matched parts are marked and must not be rotated when nesting.

Have it made

Send this cut list to a joinery on Medosha and ask what they would charge to build it.