Back to the design
Excel

Fitted wardrobe, 2400 mm

5085 × 2400 × 600 mm · 4 bays · White, satin

Cut list produced 06/09/2026 for Yisehak Tilahun · www.medosha.net/designs/fitted-wardrobe-2400-mm-36383

42

Panels

30.975 m²

Board

66.66 m

Banding

1.7

Shop days

4 mm HDF back panel, white4 pieces · 7.784 m² · 4 sheets

#PartLengthWidthQtyEdge bandingGrain
1Back panel — bay-1230010302—Any
2Back panel — bay-2230010211—Any
3Back panel — bay-mt5rbbgo-17209701—Any

18 mm MDF, white melamine38 pieces · 23.191 m² · 8 sheets

#PartLengthWidthQtyEdge bandingGrain
4Bottom30446001FrontAny
5Top30446001FrontAny
6Left gable23006002FrontAny
7Divider 122646002FrontAny
8Door — bay-1 (pair)22964986All four edgesAny
9Shelf — bay-210035868FrontAny
10Door — bay-mt5rbbgo-1 (pair)7164642All four edgesAny
11Bottom9343501FrontAny
12Top9343501FrontAny
13Shelf — bay-mt5rbbgo-19343362FrontAny
14Left gable7203502FrontAny
15Zekolo leg1005010—Any

Sheet layout

4 mm HDF back panel, white

4 sheets of 2440 × 1220 mm · 7.785 m² cut from 11.907 m² · 35% offcut

12300 × 10302440 mm1220 mm
Sheet 1 of 4 · 1 piece · 80% used
12300 × 10302440 mm1220 mm
Sheet 2 of 4 · 1 piece · 80% used
22300 × 10212440 mm1220 mm
Sheet 3 of 4 · 1 piece · 79% used
3720 × 970 ↻2440 mm1220 mm
Sheet 4 of 4 · 1 piece · 23% used

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

18 mm MDF, white melamine

8 sheets of 2440 × 1220 mm · 19.539 m² cut from 23.814 m² · 18% offcut

2 pieces do not fit a sheet

  • · Bottom — 3044 × 600 mm does not fit a 2440 × 1220 mm sheet in either direction
  • · Top — 3044 × 600 mm does not fit a 2440 × 1220 mm sheet in either direction
62300 × 60062300 × 60015152440 mm1220 mm
Sheet 1 of 8 · 4 pieces · 93% used
72264 × 60072264 × 600151515152440 mm1220 mm
Sheet 2 of 8 · 6 pieces · 92% used
91003 × 58691003 × 58691003 × 58691003 × 586151515152440 mm1220 mm
Sheet 3 of 8 · 8 pieces · 80% used
91003 × 58691003 × 58691003 × 58691003 × 5862440 mm1220 mm
Sheet 4 of 8 · 4 pieces · 79% used
82296 × 49882296 × 4982440 mm1220 mm
Sheet 5 of 8 · 2 pieces · 77% used
82296 × 49882296 × 4982440 mm1220 mm
Sheet 6 of 8 · 2 pieces · 77% used
82296 × 49882296 × 4982440 mm1220 mm
Sheet 7 of 8 · 2 pieces · 77% used
10716 × 46410716 × 46411934 × 35012934 × 35014720 × 35014720 × 35013934 × 33613934 × 3362440 mm1220 mm
Sheet 8 of 8 · 8 pieces · 82% used

Numbers match the cut list. Cuts run edge to edge in strips, which is how a panel saw works — take the horizontal cuts first, then the vertical ones within each strip. Allow 3.2 mm for the blade.

Hardware

  • Soft-close concealed hinge, 110° — 8 door leaves34 each
  • Brushed steel bar handle, 160 mm — One per front8 each
  • Shelf support pin — 10 shelves, four pins each40 each
  • Adjustable cabinet leg — Front and back rows16 each
Estimated priceETB 50,564

ETB 40,451 to make plus 25% margin. 0% of it is priced from live supplier listings; the rest is estimated from catalogue rates. This is an estimate produced from a design, not a quotation.

Notes

  • · All dimensions in millimetres. Length runs with the grain where the board has one.
  • · Sheet counts come from the layout on the following pages, not from an offcut allowance.
  • · Wardrobe: add a divider or specify a thicker board for the 1003 mm shelf.
  • · Wall cupboard: add a divider or specify a thicker board for the 934 mm shelf.

Have it made

Send this cut list to a joinery on Medosha and ask what they would charge to build it.